Janome Binder Foot for 5mm Machines

The binder foot is used to apply pre-folded bias binding tape or bias tape you have cut yourself to the edge of fabric in one easy step. It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zigzag or decorative stitches as well as straight stitch. 10 mm to 14 mm bias tape can be used.

Options
9mm Models - SKU: 202099008
7mm Models - SKU: 200313005
5mm Models - SKU: 200140009

WHAT SETTINGS DO I NEED TO USE FOR BINDING ON MY MACHINE?
Stitch: Straight Stitch (Center needle position)
Thread Tension: “Auto” or 3 – 5
Stitch Length: 1 – 3
Stitch Width: 0

HOW TO BIND WITH PREFABRICATED BINDING TAPES:
1. Cut the end of the tape diagonally, and insert it into the binder foot.
2. Push out the end toward the needle hole of the foot with a needle or a stiletto.
3. Insert the edge of the cloth into the opening of the guide.
4. Sew slowly, guiding the edge of the cloth with your middle finger on the finger rest and, while guiding the binding tape through the conical tape guide correctly with your right hand.

The Janome Binder Foot fits the following sewing machine models:
Janome: RE1306, RE706, 1008, JR1012, 1000, HD1000, My Style 16, My Style 18, My Style 20, My Style 22, My Style 24, My Style 28, My Style 32, 652, 653, 655, 509, 521, 525, 625E, SP1221 (Inspiration)

(JA-200140009)

SKU JA-200140009
Brand JANOME
Unit Of Measure ea

More From This Category